ntu.edu.tw
-
- PhD (Mechanics), Cornell University, 1985
- MS (Structural Engineering), Lehigh University, 1981
- BE (Civil Engineering), National Taiwan University, 1979
- President, Society of Mechanics,R.O.C., 2014-2015.
- Vice President, National Applied Research Laboratories, 2006-2012.
- Editor-in-Chief, Journal of Mechanics, 2002-2013.
- Director, Institute of Applied Mechanics, National Taiwan University, 1994-1997.
- Deputy Director, Institute of Applied Mechanics, National Taiwan University, 1992.
- Professor, Institute of Applied Mechanics, National Taiwan University, 1991-present.
- Associate professor, Institute of Applied Mechanics, National Taiwan University, 1986-1991.
- Post-doctoral research associate, Cornell University, 1985.
- Elasticity I
- Anisotropic Elasticity
- Applied Math I
- Fracture Mechanics
- Anisotropic Elasticity
- Mechanics of Materials
- Zong Zuo-Chang chair, National Taiwan University (2012).
- Outstanding Teaching Award, National Taiwan University (2008)
- Distinguished Professor, National Taiwan University (2006~ )
- Distinguished Research Fellow, National Applied Research Laboratories (2006-2012)
- Distinguished Research Fellow Award, National Science Council, Taiwan(2005-2008)
- Sun Fang-Toh medal, Society of Mechanics, R.O.C. (2005)
- Fellow of Society of Mechanics, R.O.C. (2006)
- SuperiorTeaching Award, National TaiwanUniversity(1991, 2000)
- Outstanding Research Award, National Science Council (1990, 1991, 2000, 2001, 2002, 2003, 2004).
- Superior Research Award, National Science Council (1989, 1992, 1994)
- Kuang-Chong Wu and Pei-Shi Hsiao, 2015, “A new boundary integral formulation for bending of anisotropic plates,”Acta Mechanica, accepted.
- Kuang-Chong Wu and Shi-Ming Huang, 2015, “Dugdale model for a dynamically expanding crack in an orthotropic solid,” International Journal of Fracture 192, 245-251.
- Kuang-Chong Wu and Pei-Shi Hsiao, 2015, “An exact solution for an anisotropic plate with an elliptic hole under arbitrary remote uniform moments,” Composites Part B 75, 281-287.
- Yu‑Jui Fan, Horn‑Jiunn Sheen, Zheng‑Yu Chen, Yi‑Hsing Liu, Jing‑Fa Tsai, Kuang‑Chong Wu, 2015, “TIRF‑enhanced nanobeads’ Brownian diffusion measurements for detecting CRP in human serum,” Microfluidics and Nanofluidics, 19, 85-94.
- K.-C. Wu, Y.-L. Hou, S.-M. Huang, 2015, ”Transient analysis of multiple parallel cracks under anti-plane dynamic loading,” Mechanics of Materials, vol.81, 56-61.
- Huang, Yao-Hung and Chang, Jeng-Shian and Chao, Sheng D. and Wu, Kuang-Chong and Huang, Long-Sun, 2014, “Improving the binding efficiency of quartz crystal microbalance biosensors by applying the electrothermal effect,” Biomicrofluidics, 8, 054116.
- Yu-Ching Shih, Chuin-Shan Chenand Kuang-Chong Wu, 2014, “First-Principles Surface Stress Calculations and Multiscale Deformation Analysis of a Self-Assembled Monolayer Adsorbed on a Micro-Cantilever,”Sensors 14.4, 7435-7450.
- Yu-Ching Shih, Chuin-Shan Chen, Kuang-Chong Wu, 2014, “Chain Length Effect on Surface Stress of Alkanethiolates Adsorbed onto Au(111) Surface: a van der Waals Density Functional Study,” Journal of Mechanics, vol.30, pp. 241-246.
- K.-C. Wu, S.-M. Huang and S.-H. Chen, 2013, “Dynamic Stress Intensity Factors of Collinear Cracks under a Uniform Tensile Stress Wave,” CMES: Computer Modeling in Engineering & Sciences vol.93, no.2, pp.133-148.
- Wu, K.-C. andS.-M. Huang, 2013,“Dugdale model for an expanding crack under shear stress,”Engineering Fracture Mechanics 104, 198–207.
- Wu, K.-C.,2013, “Transient dislocation emission from a crack tip in an anisotropic elastic material,” Acta Mechanica: Volume 224, Issue 5 , pp. 925-933.
- Huang, K. R., Chang, J. S., Chao, S. D., & Wu, K. C. (2012). Beam model and three dimensional numerical simulations on suspended microchannel resonators. AIP Advances, 2(4), 042176-042176.
- Kuang-Chong Wu, 2012, Concentrated impact loading on one face of a semi-infinite crack in an anisotropic elastic material, International Journal of Solids and Structures 49, 2681-2685.
- Kuan-Rong Huang, Jeng-Shian Chang, Sheng D. Chao, Tzong-Shyan Wung, and Kuang-Chong Wu, 2012, “Study of Active Micromixer Driven by Electrothermal Force,” Jpn. J. Appl. Phys. 51047002.
- K. C. Wu and J. C. Chen, 2011, “Transient Analysis of Collinear Cracks under Anti-Plane Dynamic Loading,” Procedia Engineering 10, 924–929.
- Chia-Ming Jan, Yu-Hsun Lee, Kuang-Chong Wu and Chih-Kung Lee,2011, “Integrating fault tolerance algorithm and circularly polarized ellipsometer for point-of-care applications,”Optics Express 19, 5431.
- Liao, Po-Jen; Chang, Jeng-Shian; Chao, Sheng D.; Chang, Hung-Chi; Huang, Kuan-Rong; Wu, Kuang-Chong; Wung, Tzong-Shyan. 2010. "A Combined Experimental and Theoretical Study on the Immunoassay of Human Immunoglobulin Using a Quartz Crystal Microbalance." Sensors 10, no. 12: 11498-11511.
- Cheng, C. -C., Lin, C. -Y., Ho, J. -H., Chen, C. -S., Shieh, J., Wu, W. -J., Wu, K. -C., Lee, C. -K. 2010. “Analysis of a pot-like ultrasonic sensor with an anisotropic beam pattern,” Journal of Mechanics, 26, 373-384.
- Yu-Jui Fan, Horn-Jiunn Sheen, Yi-Hsing Liu, Jing-Fa Tsai, Tzu-Heng Wu, Kuang-Chong Wu and Shiming Lin, 2010, ”Detection of C-Reactive Protein in Evanescent Wave Field Using Microparticle-Tracking Velocimetry,” Langmuir, 26 (17), 13751–13754.
